EvoGraft DBM Putty
A moldable DBM allograft formulated to resist irrigation and maintain placement within the prepared graft site.
| SKU | Volume |
|---|---|
| EHG-01P | 1 cc |
| EHG-02P | 2.5 cc |
| EHG-05P | 5 cc |
| EHG-10P | 10 cc |
EvoGraft Demineralized Bone Matrix
Bone Graft Biology. Shaped for the Site.
EvoGraft Demineralized Bone Matrix is a family of human bone allografts supplied in multiple compositions and geometries for clinician-directed bone-grafting procedures.
- Human bone allograft
- Multiple graft geometries
- Osteoconductive scaffold
- Osteoinductive potential
- Configuration-specific handling
- Multiple sizes and volumes
What is DBM
Demineralized human bone in clinically distinct forms
Demineralized bone matrix, commonly called DBM, is human allograft bone that has undergone processing to remove much of its mineral content while retaining portions of the native bone matrix.
EvoGraft DBM is not a single product. It is a portfolio of putties, composites, cancellous forms and cortical fibers designed to give the surgical team different options for filling, packing, spanning or conforming to non-structural bone voids.
- Material
- Processed human allograft bone
- Available forms
- Putty, crush mix, strips, cubes, fibers, fiber boats and blended fibers
- Selection
- By composition, geometry, dimensions and volume
- Handling
- Ready-to-use or hydration-dependent, according to configuration
Why multiple forms
Because bone voids are not all alike
A confined defect, an irregular void and a broad posterolateral space do not present the same handling requirements. The EvoGraft DBM portfolio allows the clinician to select a graft geometry aligned with the anatomy and procedural plan.
Moldable forms
Putty and crush configurations can be shaped and distributed within irregular spaces.
Compressible forms
DBM strips and cubes can be compressed for placement and are designed to conform within the intended graft site.
Fibrillar forms
Loose cortical fibers create an interconnected graft architecture that can be hydrated, packed or combined with other graft materials according to product labeling.
Pre-shaped forms
Fiber boats provide cortical fibers in an established geometry for more controlled placement across a defined area.
Composite forms
Crush Mix and OsteoBlend combine different bone components to create distinct handling and scaffold characteristics.
Product platform
One DBM family. Seven distinct graft geometries.
Explore seven EvoGraft DBM configurations organized by product geometry, volume and dimensions.
EvoGraft DBM Crush Mix
A ready-to-use composite of demineralized cortical bone matrix and mineralized cancellous chips, combining a moldable component with particulate scaffold.
| SKU | Volume |
|---|---|
| EHG-01C | 1 cc |
| EHG-02C | 2.5 cc |
| EHG-05C | 5 cc |
| EHG-10C | 10 cc |
EvoGraft DBM Sponge Strips
Fully demineralized cancellous bone supplied as compressible strips that return toward their original form following compression.
| SKU | Dimensions |
|---|---|
| EVS26197 | 26 × 19 × 7 mm |
| EVS50205 | 50 × 20 × 5 mm |
| EVS50207 | 50 × 20 × 7 mm |
EvoGraft DBM Cubes
Compressible, open-porous DBM cubes available in established dimensions for focused placement.
| SKU | Dimensions |
|---|---|
| EV73010 | 10 × 10 × 10 mm |
| EV73012 | 12 × 12 × 12 mm |
| EV73014 | 14 × 14 × 14 mm |
EvoGraft DBM Cortical Fibers
Loose, pliable fibers composed of demineralized human cortical bone. The fibers rehydrate according to the current Instructions for Use and may be compressed or distributed within the graft site.
| SKU | Volume |
|---|---|
| EVF020 | 2 cc |
| EVF050 | 5 cc |
| EVF010 | 10 cc |
EvoGraft DBM Fiber Boats
Demineralized cortical fibers entangled and formed into established boat-like configurations for controlled hydration and placement.
| SKU | Dimensions |
|---|---|
| EVB50205 | 50 × 25 × 5 mm |
| EVB100205 | 100 × 25 × 5 mm |
EvoGraft OsteoBlend
A graft blend composed of 70% demineralized cortical fibers and 30% demineralized cortical granules.
| SKU | Volume |
|---|---|
| EV70305 | 5 cc |
| EV70310 | 10 cc |
| EV70315 | 15 cc |
Selection
Select by biology, geometry and handling
The surgical team may consider several practical questions when selecting a DBM configuration.
- Does the site require a moldable, particulate, compressible or pre-shaped graft?
- Will the product be used alone or with autograft, bone marrow aspirate or another graft material?
- How much graft volume is required?
- Will the graft be exposed to substantial irrigation?
- Does the site require focused placement or broader distribution?
- Does the configuration require hydration before implantation?
Final product selection must remain consistent with the current Instructions for Use, the prepared graft site, institutional protocol and clinician judgment.
Configuration-specific preparation
Handling varies across the DBM portfolio
- 01
Verify
Confirm the selected product, dimensions or volume, expiration date and package integrity.
- 02
Open
Transfer the product to the sterile field using aseptic technique.
- 03
Prepare
Use directly or hydrate according to the product-specific Instructions for Use.
- 04
Shape
Mold, compress, pack or position the graft according to its geometry and the procedural plan.
- 05
Place
Place within the prepared graft site consistent with the product labeling.
- 06
Track
Complete the required allograft identification and tissue-tracking documentation.
FAQ
Common DBM questions
What is demineralized bone matrix?
DBM is processed human allograft bone from which much of the mineral content has been removed while portions of the native bone matrix are retained.
Are all DBM products putties?
No. EvoGraft DBM is available as putty, crush mix, strips, cubes, loose cortical fibers, fiber boats and OsteoBlend.
What is the difference between DBM Fibers and Fiber Boats?
DBM Fibers are supplied as loose cortical fibers selected by volume. Fiber Boats contain fibers formed into established dimensions for more controlled placement.
What is OsteoBlend?
EvoGraft OsteoBlend is composed of 70% demineralized cortical fibers and 30% demineralized cortical granules.
Does every DBM configuration require hydration?
No. Preparation requirements vary by product. Follow the current product-specific Instructions for Use.
Can DBM be combined with bone marrow aspirate or autograft?
Certain configurations may be used with other graft materials when permitted by their labeling and selected by the treating clinician. The current Instructions for Use govern.
Product and use information
One family. Product-specific controls.
The regulatory classification, composition, processing method, preparation requirements, sterilization method and indications may vary among DBM configurations.
Each product must be described and used according to its own current Instructions for Use and labeling. Website language should not be interpreted as expanding an individual product's labeled indications or establishing comparative clinical effectiveness.
Request current Instructions for Use and product-specific documentation from Evologics.
EvoGraft DBM
Find the DBM geometry aligned with your procedural plan.
Connect with Evologics for product comparisons, specifications, available volumes, Instructions for Use, facility-review documentation and ordering support.